Top Section


Bottom Section

SRAM eTap Wireless Electronic Road Upgrade Kit

  • All electronic upgrade parts in one box, for road bikes
  • Use with your existing SRAM chainset, brakes, cassette, etc.
  • Totally new shifting logic, wireless, faultless
  • Battery charger and firmware upgrade dongle included

RRP £1,278 £1,149.99


ASK US: [email protected]

CALL US: +44 (0)1323 417071



More from

 » Components » Groupsets

Product Information

SRAM eTap Wireless Electronic Road Upgrade Kit

It’s Time To Shift Forward. At SRAM, they know that if a technological advancement clutters the experience, it shouldn’t be called an advancement. Because it’s a bicycle. It’s supposed to be simple. To make something elegant to the point where it removes what’s in the way... that’s advancement. That is the standard they held themelves to while developing their first electronic shifting system; SRAM RED® eTap.

Full Specification

SRAM RED® eTap Shifters

SRAM RED® eTap features race-car-inspired paddle shift logic that virtually eliminates mistaking upshifts for downshifts, while keeping shifting precise, fast, and easy. It’s a logic that is simplified for speed: right lever makes it harder, left lever makes it easier, both levers to change the front ring. Our revised ErgoFit™ controls seamlessly connect rider and machine with Reach Adjust™ to fit any hand. You’ll shift more, with less effort and spend less time doing it. Carbon ErgoBlade™ levers and large SRAM eTap paddles provide positive controls for rider input.


- Wireless connection via AIREA™ network for fast and clean installation
- Revised ErgoBlade levers provide confident control
- eTap logic and positive feedback paddles eliminate shifting mistakes


SRAM RED® eTap Rear Derailleur

The SRAM RED® eTap rear derailleur executes shifts the instant you demand it, with military precision. Wirelessly. It’s easy to set up, clean in appearance and delightfully uncomplicated. Mechanical necessities such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a 238g (with battery) shifting wonder.


- Wireless connection via AIREA™ network for fast and clean installation
- Designed to work with SRAM PowerGlide™ and PowerdomeX™ cassettes


SRAM RED® eTap Front Derailleur

SRAM Yaw™ technology changed front shifting forever, eliminating the need for trim. The SRAM RED® eTap Front Derailleur makes a good thing better by executing front shifts confidently and quickly over our proprietary wireless communication protocol. The eTap shifter optimizes Yaw adjustments as needed throughout the shift range with no need for rider input.


- Wireless connection via AIREA™ network for fast and clean installation
- Braze-on / clamp adaptor
- Designed to work with SRAM X-GlideR™ 11-speed chainrings


SRAM® eTap Battery Charger

eTap batteries are literally a snap to remove and charge.

Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor.

A full charge takes just 45 minutes to complete.


SRAM® eTap Firmware Update Dongle 

USB dongle for SRAM RED® eTap firmware.